If you're needin work done...
+8
ScooterTrash69
ZombieNNN
KCS10247
mick01
wseibert
Phantom
hayweed
Dragon
12 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Re: If you're needin work done...
Kewl. You may want to go back and edit that part out of it or re-word it. Sounds like you are putting me and the shop down. I knew thats not what you meant but someone out there may take it that way.
But dont worry. I had a feeling you were talking about something else.
But dont worry. I had a feeling you were talking about something else.
hayweed- Admin
- Posts : 2930
Join date : 2010-05-13
Age : 54
Location : Mobile,Al
Re: If you're needin work done...
Thanks dragon.
hayweed- Admin
- Posts : 2930
Join date : 2010-05-13
Age : 54
Location : Mobile,Al
Re: If you're needin work done...
Thanks Nick for some reason I thought you were in Daphne. I will look for someone closer. Thanksnickestes wrote:no balancer right now but I do outsource them to a guy I think I can get you a deal.
mick01- road grime
- Posts : 111
Join date : 2010-05-15
Age : 68
Location : irvington
Re: If you're needin work done...
Thanks Hayweed I will keep that in mind.hayweed wrote:mick01 wrote:Can y'all mount bike tires off the bike? Without damage to the wheel? If so how much? Put a new metzler on the rear a few months ago, guy charged me 55.00 and scratched my wheel all up.Getting ready for one on the front. ThanksDragon wrote:Hope this is alright to say on this board, but in light of Hayweed having some shop issues as well as some others...
Nick and I have gotten together in his shop and do ALL kinds of work on bikes plus cars, trucks and just about anything else mechanical and can do fabrication as well. I believe I speak for us both when I say we can guarantee getting stuff professionally done for anyone for far less than anyone else. Bring an estimate and we will beat it usually by far. Bring a friend in, we can likely get ya a small finders fee as well for the referral depending on the size of the job and none are too small. Members will get a lil extra discount as well.
So holler at either one of us.
I can mount bike tires and ballance them in my shop. Usually about $30-$40. I dont know what Dragon is talking about shop issues.
mick01- road grime
- Posts : 111
Join date : 2010-05-15
Age : 68
Location : irvington
Re: If you're needin work done...
oh that nothing Harley can not even fix a fule pump ...... so what else is new
KCS10247- road grime
- Posts : 111
Join date : 2010-05-15
Age : 50
Location : mobile
Re: If you're needin work done...
I did the wiring in my 14 inch apes, now my turn signals are hit and miss. I live in Mobile. Pointers? Anybody really good at wiring?
ZombieNNN- Middle of the Pack
- Posts : 544
Join date : 2010-07-08
Age : 59
Location : Mobile (West Mobile), AL
Re: If you're needin work done...
Remind me what you ride.
hayweed- Admin
- Posts : 2930
Join date : 2010-05-13
Age : 54
Location : Mobile,Al
Re: If you're needin work done...
'07 Honda Shadow VLX 600.
ZombieNNN- Middle of the Pack
- Posts : 544
Join date : 2010-07-08
Age : 59
Location : Mobile (West Mobile), AL
Re: If you're needin work done...
You may have pinched a wire in the handlebar controll's. Very easy to do. The wires are small and easy to cut. Could have even pulled a wire in half when pulling them through the bars. I would have to look it over and test the wires to make sure one is not shorted.
hayweed- Admin
- Posts : 2930
Join date : 2010-05-13
Age : 54
Location : Mobile,Al
Re: If you're needin work done...
Roger that.
ZombieNNN- Middle of the Pack
- Posts : 544
Join date : 2010-07-08
Age : 59
Location : Mobile (West Mobile), AL
Re: If you're needin work done...
I need some help from someone with timing light. I have a 89
sportster and thought I had a problem with my dyna s ignition.
Turned out my problem was no voltage to coil. Fixed that and
bike is running fair now but I moved ignition module while
checking that out. "I know, should have checked voltage 1st."
I need someone to help me out and set timing back with a
timing light. I've considered going out and buying one but
if someone could help me out today then I would rather
have someone who's done this to help me out. Anyone who
can help me would be appreciated and paid for their time
it they choose. Thanks Todd. PM me if you can help please!
sportster and thought I had a problem with my dyna s ignition.
Turned out my problem was no voltage to coil. Fixed that and
bike is running fair now but I moved ignition module while
checking that out. "I know, should have checked voltage 1st."
I need someone to help me out and set timing back with a
timing light. I've considered going out and buying one but
if someone could help me out today then I would rather
have someone who's done this to help me out. Anyone who
can help me would be appreciated and paid for their time
it they choose. Thanks Todd. PM me if you can help please!
ScooterTrash69- Skid Mark
- Posts : 50
Join date : 2010-07-31
Age : 54
Location : West Mobile
Re: If you're needin work done...
I imagine Hayweed has a light. Not all that hard to set really, if you can get hold of a shop manual. Maybe they have downloadable ones online.
Re: If you're needin work done...
I need a shovelhead and 4 speed trany rebuild. Do you do that
DDixon- newbie
- Posts : 28
Join date : 2012-07-10
Age : 42
Location : Mobile
Re: If you're needin work done...
Why do you need the shovelhead engine and tranny rebuild?? The bike in that bad of shape?
72shovelhead- Rear of the Pack
- Posts : 415
Join date : 2011-09-20
Age : 68
Location : spencer field Fla.
Re: If you're needin work done...
Shovels are my specialty... If dragon can't get to it.
misfit- Seat Cushion
- Posts : 188
Join date : 2010-09-14
Age : 41
Location : Mobile,AL
Re: If you're needin work done...
you guy do know that this topic was started 2 years ago IJS last post was aug 21 2010
crispy- Moderator
- Posts : 663
Join date : 2010-06-07
Age : 50
Location : Satsuma,Al
Re: If you're needin work done...
Misfit the bike is not in that bad of shape. But I want to address some oil leaks and mostly I can't shift into 3rd or 4th. The motor doesn't need to be rebuilt probably just the transmission. If you would be into it I would like to talk about it with you. Thanks
DDixon- newbie
- Posts : 28
Join date : 2012-07-10
Age : 42
Location : Mobile
Re: If you're needin work done...
PMed you my number. Call me tomorrow around noon.
misfit- Seat Cushion
- Posts : 188
Join date : 2010-09-14
Age : 41
Location : Mobile,AL
Page 2 of 2 • 1, 2
Similar topics
» Needin some help finding a part size
» Have truck and trailer, will work.
» Did someone say they were a TIG welder out of work?
» A work in progress
» Photography Work
» Have truck and trailer, will work.
» Did someone say they were a TIG welder out of work?
» A work in progress
» Photography Work
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|